User Manual

Suitable for: Nissan Navara NP300
FI11928
Issue: 3 Date: 14/08/2018
15
Kit Part No: TPWKIT-008
© 2018
• In the passenger side foot well, pull back the floor carpet (1) to
expose the insulation foam.
1
Step 13
Step 14
Step 15
Page 08 of
Ensure the grommet (4) is seated correctly.
• Slide the Brake Controller ECU Assembly (1) over the two studs.
• Secure the Brake Controller ECU Assembly (1) on the upper
threaded stud using the supplied M8 Flat Washer (2) and M8 Nut
(3).
2
3
1
4
• On the LHS firewall, remove the factory grommet (1).
1