User Manual

Suitable for: Nissan Navara NP300
FI11928
Issue: 3 Date: 14/08/2018
15
Kit Part No: TPWKIT-008
© 2018
• From behind the
connectors (2).
• Dislodge the cable tie clip (3) and remove the drivers side lower
trim (1).
drivers side lower trim (1) disconnect all the
3
2
2
2
1
Page 06 of
Step 7
Step 8
Step 9
• Remove the cupholder assembly (1) from the center console by
pulling in an upwards direction.
• Dislodge the blank switch panel (2) from the cupholder assembly
(1).
2
1
• Cut out and adhere the supplied Switch Template (1) (Page 15
blank switch panel (2).
• Using a Ø2mm drill bit, drill out the pilot holes in the locations
specified on the template (1).
• Drill out the top hole to Ø3.5mm and the bottom hole to Ø10mm.
) to
the center of the
2
1