User Manual

General Notes

Parts Supplied

Safety Notes

D E F

Parts Supplied

• Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting

instructions. Failure to do so may cause damage to the vehicle or the accessory.

• Ensure all recyclable discarded vehicle accessory components are packaging are recycled following local

recycling regulations.

• It is always recommended that this accessory is fitted by a qualified automotive technician.

• Safely store and protect any removed vehicle components.

• Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable

automotive rust inhibitor.

• Remove all metal swarf and dust from all vehicle surface if surface is used for accessory installation.

• Check that all work practices comply with safety standards.

• Please wear appropriate clothing and use safety equipment.

Electric Brake Harness

Cable Ties x55

M8 Nut x1

M8 Flat Washer x1

M4 Pan Head Bolt x4

M4 Washer x4

M4 Spring Washer x4 Heatshrink x1

Cat 5 Cable x1 4-way Connector x1

ECU Bracket x1

Tools Required

Phillips Head Screwdriver Trim Removal Tools Ratchet Socket Set

Wire Cutters

Crimper

Utility Knife

Page 02 of

Butt Splice x1

M N

Grommet x1

Switch Template

(Page 15) x1

200mm x35

900mm x20

Electric Drill Drill Bit Set

M8 Large Flat Washer x2

Fitting Instructions x1

Suitable for: Nissan Navara NP300

FI11928

Issue: 3 Date: 14/08/2018

Kit Part No: TPWKIT-008