User Manual

Step 22

Page 11 of

Step 23

• Route the Cat 5 Cable (1) along the dash towards the center

console area.

• Continue routing the Cat 5 Cable (1) under the centre console

and out the cup holder cavity. Use a guide wire if necessary.

• Secure the Cat 5 Cable (1), using the supplied Cable Ties, to the

existing vehicle harnesses where available.

• Plug the Cat 5 Cable (1) into the remote head (2) and refit the

cupholder assembly.

Ensure the Cat 5 Cable (1) is routed in a way that does not

interfere with the steering column, vehicle pedals or the gear

and handbrake mechanisms.

• In the engine bay, route the Electric Brake Harness (1) (tail light

patch) down to the chassis rail towards the rear of the vehicle.

• Secure harness at every 300mm using supplied 900mm Cable

Ties.

Suitable for: Nissan Navara NP300

FI11928

Issue: 3 Date: 14/08/2018

Kit Part No: TPWKIT-008