User Manual

FI11979

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-007

Suitable for: Kluger / Prado

Step 14

Step 13

Step 15

Page 08 of

Cat 5

Cable

4-way ECU

connector

• Secure the Brake Controller ECU (1) to the ECU Bracket (2) using

the supplied M4 Pan Head Screws (3), M4 Flat Washers (4) and M4

Nyloc Nuts (5).

• On the support bar located in the RHS area of the glove box,

release the two vehicle M8 nuts (1) from the threaded studs.

• Using the vehicle M8 nuts (1), secure the ECU Bracket assembly (2)

onto the two threaded studs as shown.

Important

Ensure to use the mounting holes (6) on the ECU Bracket (2)

that are designed for the Toyota Kluger.

• Connect the 4-way connector (1) from the Electric Brake Harness

to the Brake Controller ECU (2).

• Connect the Cat 5 Cable (3), supplied in the wiring kit, to the

Brake Controller ECU (2).

KLUGER