User Manual

FI11979

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-007

Suitable for: Kluger / Prado

Step 22

Step 23

• In the engine bay, route the Electric Brake Harness (1) along the

existing vehicle harness towards the battery.

• Fasten the positive terminal of the Electric Brake Harness (1) to the

positive battery terminal.

• Fasten the negative terminal of the Electric Brake Harness (1) to

the negative battery terminal.

• Secure the harness with Cable Ties at 200mm intervals. Secure the

harness fuse to the vehicle harness with a Cable Tie.

• Reconnect the engine bay negative battery terminal.

• Test the operation of the Electric Brake Harness using a test lamp

or a multimeter to ensure correct operation.

• Dispose of any parts not used from the fitment.

Please place the Owners Manual in the glov box after

installation completed.

the is

Important

Secure all harnesses to the vehicle using the supplied

cable ties. Refit all removed parts and secure all

fasteners to Service Manual torque specifications.

Important

Reprogram all radio stations and clock settings by

referring to the vehicle's Workshop Manual.

E. & O.E. This document is copyright and must not be used except as permitted below or under the Copyright Act 1968. You may reproduce

and publish this document in whole or in part for your or your organisation's own personal or internal compliance, educational or non-

commercial purposes. You must not alter or amend this document in any way. You must not reproduce or publish this document for

commercial gain without the prior written consent of the copyright owner.

Page 20 of

PRADO