User Manual

FI11979

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-007

Suitable for: Kluger / Prado

Step 16

Step 17

Step 18

• Under the LHS of the vehicle, continue routing the Electric Brake

Harness (1) along the LHS chassis

• Secure using the supplied 900mm Cable Ties.

• At the rear cross member, route the Electric Brake Harness (1)

towards the rear of the vehicle, following the existing vehicle

harness.

• From the LHS of the rear cross member, route the Electric Brake

Harness (1) behind the trim towards the trailer socket.

Important

Ensure the Electric Brake Harness (1) does not make contact

with any sharp edges or moving parts. Avoid areas of extreme

temperatures.

Page 18 of

PRADO

• At the rear of the vehicle, remove the vehicles trailer socket

fasteners to release the trailer socket (1).

• Remove the cover (2) from the trailer socket (1).