User Manual

FI11979

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-007

Suitable for: Kluger / Prado

Step 1

Step 3

Step 2

PRADO (For Kluger refer to Page 4)

• Note down radio settings, as per Toyota Workshop manual.

• In the engine bay, disconnect the negative battery terminal (1).

Important

Always refer to the vehicle’s Workshop Manual when

removing vehicle components.

• Inside the vehicle, remove the passenger side scuff plate trim (1).

• Remove the kick panel (2).

• Open the glovebox (3) and dislodge the dampener.

• Remove the glovebox (3).

• Remove the upper glovebox garnish (4).

• Remove the LHS dash side garnish (5).

• Remove the glovebox undertray (1) by first removing the screw

(2).

• Remove the four bolts (3) from the glovebox surround (4).

• Remove the glovebox surround (4).

Page 13 of