User Manual

FI11979

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-007

Suitable for: Kluger / Prado

Step 19

Step 20

Step 21

Page 10 of

• Under the LHS of the vehicle, remove the fasteners and dislodge

the underbody cover (1).

• Route the Electric Brake Harness (2) along the LHS chassis or along

the air conditioning pipes towards the vehicles rear cross

member.

• Secure using the supplied 900mm Cable Ties at 300mm intervals.

• Reinstall the underbody cover (1).

• At the rear cross member, route the Electric Brake Harness (1)

towards the rear of the vehicle, following the existing vehicle

harness.

• From the LHS of the rear cross member, route the Electric Brake

Harness (1) behind the trim towards the trailer socket.

Important

Ensure the Electric Brake Harness (1) does not make contact

with any sharp edges or moving parts. Avoid areas of extreme

temperatures.

• At the rear of the vehicle, remove the vehicles trailer socket

fasteners to release the trailer socket (1).

• Remove the cover (2) from the trailer socket (1).

KLUGER