User Manual

Step 16

Step 17

Step 18

• In the engine bay, route the grommet branch of the Electric Brake

Harness (1) through the washer bottle reservoir cavity (2).

• Continue routing the Electric Brake Harness (1) along the wheel

arch and through the grommet hole.

• Make sure the grommet (2) is seated correctly.

• Secure the Electric Brake Harness (1) using the supplied Cable Ties.

Page 09 of

• Inside the vehicle, using the table below, house the terminals (1)

from the Electric Brake Harness into the supplied 4-Way

Connector (2), ensuring the terminals lock into the housing.

• Snap off the secondary lock (3) from behind the 4-Way

Connector (2).

• Fit the secondary lock (3) to the underside of the 4-Way

Connector (2).

Wire Colour

Terminal

Red

Blue

White

Black

Rear View of Connector

(Wire Entry Side)

4 3 2 1

Suitable for: Isuzu MU-X / D-Max

FI11967

Issue: 3 Date: 15/08/2018

Kit Part No: TPWKIT-006