User Manual

• Continue routing the Cat 5 Cable (1) towards the left side of the
glovebox cavity.
• Secure the Cat 5 Cable (1) behind the base of the glovebox
support (2) following the factory harness using the supplied Cable
Ties.
Page 08 of
• Above the passenger kick panel area, secure the Brake Controller
ECU Bracket (1) to the two existing vehicle chassis captive nuts
using the supplied M6 Bolts (2), M6 Flat Washers (3).
• Secure the Brake Controller ECU (1) to the ECU bracket (2) using
the supplied M4 Screws (3), M4 Spring Washers (4) and M4 Flat
Washers (5).
Important
Ensure the Cat 5 Cable (1) is secured away from any
moving parts or sharp edges.
1
2
Important
Ensure the Cat 5 side of the Brake Controller ECU (1)
is facing the ground.
Cat 5
cable
4-way ECU
connector
3
4
5
2
1
Step 13
Step 14
Step 15
1
3
2
Suitable for: Isuzu MU-X / D-Max
FI11967
Issue: 3 Date: 15/08/2018
15
Kit Part No: TPWKIT-006
© 2018