User Manual

Step 19
Step 20
Step 21
Connect the (1) and Cat 5 Cable (2) to
the Brake Controller ECU (3).
4-Way Black Connector
1
In the engine bay, route the secondary branch of the Electric
Brake Harness (1) from the battery down the engine bay.
Secure the Electric Brake Harness (1) using the supplied Cable
Ties.
Continue routing the Electric Brake Harness (1) along the left hand
side chassis rail towards the rear of the vehicle following the
existing vehicle harness (2).
Using the supplied Cable Ties (3), secure the Electric Brake Harness
(1) to the vehicle harness every 300mm.
2
3
1
Page 10 of
2
3
1
3
3
Suitable for: Isuzu MU-X / D-Max
FI11967
Issue: 3 Date: 15/08/2018
15
Kit Part No: TPWKIT-006
© 2018