User Manual
Suitable for: Landcruiser LC200
FI11848
Issue: 4 Date: 14/08/2018
Kit Part No: TPWKIT-005
© 2018
Step 3
Step 1
Step 2
Important
Always refer to the vehicle’s Workshop Manual when
removing vehicle components.
• Note down all clock and radio settings.
•
• If vehicle has a dual battery kit installed, disconnect the
negative battery terminals on both batteries.
In the engine bay, disconnect the negative battery terminal (1).
1
• Remove the driver’s scuff plate (1) from the vehicle.
• For High-Spec models, disconnect the wiring from the illuminated
scuff plate (2).
1
Page 04 of
• Remove the driver’s dash under guard (1) by releasing three clips
(2) and two screws (3).
• Disconnect the footwell light wire if present.
2
2 2
3
3
1
2
13