User Manual

Parts Supplied
Safety Notes
General Notes
Tools Required
Suitable for: Landcruiser LC200
FI11848
Issue: 4 Date: 14/08/2018
Kit Part No: TPWKIT-005
© 2018
•
•
•
•
•
•
Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting
instructions. Failure to do so may cause damage to the vehicle or the accessory.
Ensure all recyclables, discarded vehicle accessory components and packaging are recycled following local recycling
regulations.
It is always recommended that this accessory is fitted by a qualified automotive Technician.
Safely store and protect any removed vehicle components.
Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable
automotive rust inhibitor.
Remove all metal swarf and dust from all vehicle surfaces if surfaces are used for accessory installation.
•
•
Check that all work practices comply with safety standards.
Please wear appropriate clothing and use safety equipment.
Ratchet
Socket Set
Side Cutters
Phillips Head Screw Driver
Trim Removal Tools
A
Electric Brake Harness x1
D E
B C
F
Switch Bezel x1
G
H
I
ECU Bracket x1
Cable Ties x25
J
K
M4 Nyloc Nut x4
Fitting Instructions x1
Crimper
Wire Stripper
Page 02 of
200mm x10
900mm x15
4-way connector x1
M4 Flat Washer x4
Butt Splice x1
Black Heat Shrink x1
Anti-abrasion Tape
100mmx100mm x1
Soldering Iron &
Solder Wire
Heat Gun
Spanner Set
13