User Manual

FI11807

Issue: 5 Date: 13/08/2018

Suitable for: Hilux / Fortuner

Kit Part No: TPWKIT-004

Step 14

Step 13

Step 15

• In the engine bay, secure the fused link ring terminal (1) to the

positive battery terminal (2).

• Secure the harness with the supplied Cable Ties.

• Route the RED, RED/WHITE & BLUE wire branch on the Electric

Brake Harness down the transmission tunnel.

• Continue routing the Electric Brake Harness (1) down the chassis

rail.

• Route the Electric Brake Harness (1) across the rear bumper

towards the trailer socket head.

• Secure the Electric Brake Harness using the supplied cable ties

every 300mm.

•

Plug the cat-5 cable (1) into the remote head (2) .

Secure the remote head to the switch insert (3) as shown, (image

A). Torque the nut (4)to 0.8 Nm.

Rotate the shaft (5) fully anti-clockwise and fit the knob to the

shaft (5) with “0" pointing upwards as shown (image B).

Page 08 of