User Manual

Step 7

FI11807

Issue: 5 Date: 13/08/2018

Suitable for: Hilux / Fortuner

Kit Part No: TPWKIT-004

Step 9

Step 8

• Continue routing the Electric Brake Harness (1) across the centre

console and towards the driver side lower dash area.

• Secure the harness (1) to the vehicle using supplied cable ties

every 300mm.

• Secure the Brake Controller ECU (1) onto the Brake Controller

Bracket (2) using supplied M4 Screws (3) M4 Spring Washer (4) and

M4 Flat Washers (5).

Page 06 of

• Inside the vehicle, using the table below, house the terminals (1)

from the Electric Brake Harness into the supplied 4-Way

Connector (2), ensuring the terminals lock into the housing.

• Snap off the secondary lock (3) from behind the 4-Way

Connector (2).

• Fit the secondary lock (3) to the underside of the 4-Way

Connector (2).

Wire Colour

Terminal

Red

Blue

White

Black

Rear View of Connector

(Wire Entry Side)

4 3 2 1