User Manual

Parts Supplied

Safety Notes

General Notes

Tools Required

FI11807

Issue: 5 Date: 13/08/2018

Suitable for: Hilux / Fortuner

Kit Part No: TPWKIT-004

•

Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting

instructions. Failure to do so may cause damage to the vehicle or the accessory.

Ensure all recyclables, discarded vehicle accessory components and packaging are recycled following local recycling

regulations.

It is always recommended that this accessory is fitted by a qualified automotive Technician.

Safely store and protect any removed vehicle components.

Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable

automotive rust inhibitor.

Remove all metals swarf and dust from all vehicle surfaces if surfaces are used for accessory installation.

•

Check that all work practices comply with safety standards.

Please wear appropriate clothing and use safety equipment.

Phillips Head Screw Driver

Electric Brake Harness x1

4-way connector x1

C D E F

M6 Spring Washer x2

Switch Insert x1

Heat Shrink x1

M4 Flat Washer x4

M4 Spring Washer x4 M4 Pan Head Bolt x4 M6 Bolt x2

Ratchet Socket Set Side Cutters Trim Removal Tool PVC Tape

Butt Splice x1

M6 Flat Washer x2

Fitting Instruction x1

Brake Controller

Bracket x1

Cable Tie x30

900mm x20

200mm x10

Page 02 of