User Manual

ManualsBrandsRedarc ManualsBrake Controller Wiring KitsTow Pro Wiring Kit to Suit Mitsubishi Triton

Suitable for: Mitsubishi Triton

FI11705

Issue: 4 Date: 14/08/2018

Kit Part No: TPWKIT-003

Page 11 of

Step 20

E. & O.E. This document is copyright and must not be used except as permitted below or under the Copyright Act 1968. You may reproduce

and publish this document in whole or in part for your or your organisation's own. Personal or internal compliance, educational or non-

commercial purposes. You must not alter or amend this document in any way. You must not reproduce or publish this document for

commercial gain without the prior written consent of the copyright owner.

• Re-connect the negative battery terminal.

• Test the operation of the Tow-Pro system as per the Tow-Pro user

manual.

• Dispose of any parts not used from the fitment.

Important

Secure all harnesses to the vehicle using cable ties.

Refit all removed parts and secure all fasteners to the

Service Manual torque specifications.

Important

Reprogram all radio stations and clock settings by

referring to the vehicle's Owner's Manual.

Please place the

in the glov box after installation completed.

Fitting Instructions and Owner's

Manual e is

Step 19

• Remove the ‘BLUE’ wire (1) from the trailer wiring harness socket

head (2).

• Tape back and isolate inside the tube.

• Insert new ‘BLUE’ wire with brass ferrule from the Brake Signal

Harness into the same position in the trailer socket.

Pin No.

Function

Cable Colour

Left-hand turn signal

Reversing signal

Earth return

Right-hand signal

Service brakes

Stop lamp signal

Rear lamps, clearance and

side marker lamps

Yellow

Black

White

Green

Blue

Red

Brown