User Manual

Suitable for:

Holden Colorado / Colorado 7

FI11736

Issue: 3 Date: 14/08/2018

Kit Part No: TPWKIT-002

Step 17

Step 16

Step 18

Page 09 of

• Connect the 4-way Connector (1) from the Electric Brake Harness

to the Brake Controller ECU (2).

• From under the engine bay, route the Electric Brake Harness (1)

(BLUE, RED & RED/WHITE wires) along the top of the chassis rail

towards the rear of the vehicle.

• Secure harness at every 300mm using supplied 900mm Cable Ties.

• Route the Electric Brake Harness (1) along the top of the chassis

rail towards the rear of the vehicle.

• Secure the Electric Brake Harness at every 300mm using the

supplied 900mm Cable Ties (2).

Note : Ensure Cable Ties are behind the fuel lines (3).