User Manual

Suitable for:
Holden Colorado / Colorado 7
FI11736
Issue: 3 Date: 14/08/2018
Kit Part No: TPWKIT-002
13
© 2018
Note - this step is not required for the Colorado 7:
• Remove the four phillips head screws (1) and remove the inner
glove compartment trim (2).
1
1
1
1
2
Step 6
Step 4
Step 5
1
• Dislodge the gear shift surrounding trim (1).
• Disconnect the connectors (2) from behind.
2
1
• Secure the Brake Controller ECU (1) onto the Brake Controller
Bracket (2) using supplied M4 Screws (3) M4 Spring Washer (4) and
M4 Flat Washers (5).
Note: Ensure the Brake Controller ECU is secured orientation as
shown.
4-Way connector
Cat 5 Cable
3
4
5
2
1
Page 05 of