User Manual

Parts Supplied
Safety Notes
General Notes
Tools Required
Suitable for:
Holden Colorado / Colorado 7
FI11736
Issue: 3 Date: 14/08/2018
Kit Part No: TPWKIT-002
•
•
•
•
•
•
Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting
instructions. Failure to do so may cause damage to the vehicle or the accessory.
Ensure all recyclables, discarded vehicle accessory components and packaging are recycled following local recycling
regulations.
It is always recommended that this accessory is fitted by a qualified automotive Technician.
Safely store and protect any removed vehicle components.
Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable
automotive rust inhibitor.
Remove all metals swarf and dust from all vehicle surfaces if surfaces are used for accessory installation.
•
•
Check that all work practices comply with safety standards.
Please wear appropriate clothing and use safety equipment.
Phillips Head Screw Driver
A
Electric Brake Harness x1
G
B
Switch Insert x1
H
C D E F
I
M4 Pan Head Bolt x4
J
K
L
4-way connector x1 Butt Splice x1
Cable Ties x40
M4 Flat Washer x4
M4 Spring Washer x4
Torx Bit
Ratchet Socket Set Side Cutters Trim Removal Tools PVC Tape
M
Fitting Instruction x1
200mm x20
900mm x20
Black Heat Shrink x1
M8 Nyloc Nut x1M8 Flat Washer x1
Brake Controller
Bracket x1
Page 02 of
13
© 2018