User Manual

Suitable for:

Holden Colorado / Colorado 7

FI11736

Issue: 3 Date: 14/08/2018

Kit Part No: TPWKIT-002

Step 21

Step 20

Step 19

• Continue routing the Electric Brake Harness (1) above the rear

LHS wheel arch liner.

• Cable tie to the existing vehicle harness.

Page 10 of

• Route the Electric Brake Harness (1) across the rear bumper

towards the trailer socket head.

• Secure the Electric Brake Harness at every 300mm using the

supplied 900mm Cable Ties.

• Remove the ‘BLUE’ wire (1) from the trailer wiring harness socket

head (2).

• Tape back and isolate.

• Insert new ‘BLUE’ wire with brass ferrule from the Electric Brake

Harness into the same position in the trailer socket.

Pin No.

Function

Cable Colour

Left-hand turn signal

Reversing signal

Earth return

Right-hand signal

Service brakes

Stop lamp signal

Rear lamps, clearance and

side marker lamps

Yellow

Black

White

Green

Blue

Red

Brown