User Manual

FORD RANGER / EVERESTSuitable for:

Kit Part No: TPWKIT-001

FI11409

Issue: 4 Date: 13/08/2018

Electric Brake Harness x1

Brake Controller Bracket

E F

M4 Nyloc Nut x4

1.5m Cat 5 Cable x1

M4 Flat Washer x4

900mm Cable Ties x15

200mm Cable Ties x15

Parts Supplied

Safety Notes

General Notes

•

Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting

instructions. Failure to do so may cause damage to the vehicle or the accessory.

Ensure all recyclables, discarded vehicle accessory components and packaging are recycled following local recycling

regulations.

It is always recommend that this accessory is fitted by a qualified automotive Technician.

Safely store and protect any removed vehicle components.

Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable

automotive rust inhibitor.

Remove all metals swarf and dust from all vehicle surface if surfaces is used for accessory installation.

•

Check that all work practices comply with safety standards.

Please wear appropriate clothing and use safety equipment.

Heatshrink x1

Butt Splice x1

Push Clip Cable Tie x1

Page 02 of

M5x16mm Thread Cutting

Screw x2

M5 Flat Washer x2

Fitting Instruction x1

Switch Template

(Page ) x117

Anti-Abrasion 50x50mm

Tape x1