User Manual

FORD RANGER / EVERESTSuitable for:
Kit Part No: TPWKIT-001
FI11409
Issue: 4 Date: 13/08/2018
17
© 2018
Step 16
Step 17
Step 18
Page 10 of
3
1
2
• Secure the ground ring terminal (1) from the Electric Brake
Harness to the vehicle earth point (2) using the existing fastener
(3).
1
•
• Secure using the supplied Cable Ties and ensuring the wire does
not interfere with any moving parts.
Inside the cabin, route the Electric Brake Harness Red Wire
terminals (1) towards the driver’s brake pedal area.
1
• Disconnect the brake switch connector (1).
• Once disconnected, identify which connector is used.
PX1 Ranger vehicles will be a 2-way connector (2).
PX2 Ranger\Everest vehicles will be a 4-way connector (3).
4-Way Connector2-Way Connector
3
2