Product Manual

MONITOR INFORMATION
Solar Panel Information
*Disconnect and reconnect the remote monitor to reset the data.
Displays a ratio showing the percentage of charge being sent to
each battery. (Only when two batteries are connected).
Displays the total charge (Amp Hours) generated from the solar
panel(s) since the remote monitor was connected.*
Displays the pulsing frequency setting which can be changed
between 25Hz and 50Hz depending on radio interference.
Displays the instantaneous current (Amps) being produced by the
solar panel(s).
Displays the maximum current (Amps) achieved by the solar
panel(s) since the remote monitor was connected.*
Displays voltage the solar panel is producing.