Product Manual
7
SYSTEM WIRING
INSTALLATION NOTES
• Before connecting your solar panel confirm the battery is properly connected.
• Always ensure the connection at Anderson plug is clean, sound and is wired
with the correct polarity.
• REDARC recommends the regulator be installed as close as possible to the battery(s). If you need
to use different cables ensure their length does not exceed 10m from the panel to the regulator.
• The supplied Anderson connectors are suitably rated for up to 50A, if multiple panels are used to
the point of exceeding this rating, alternative connectors should be sourced.
• When connecting panels from an existing setup, or non-REDARC brand panels, please ensure
that the panels are diode protected, as they may be damaged if they are not.
• Please refer to Solar Regulator manual and Battery Manufacturer’s specifications for specific
installation instructions.
• Do NOT use the folding panel in windy/gusty conditions. Damage to the panel and or other
property may result.
• No NOT use a high pressure hose to clean the folding panel. Use a damp cloth to clean
panel surfaces.
• Beware of pinch points when operating the legs on the folding panel.