Product Manual

WIRING INSTRUCTIONS
3 Connect a Battery Positive cable (Cable 1) to one of the battery terminals as shown in
diagrams B, C & D. This terminal will attach to your Auxiliary Battery positive terminal.
4 Remove the Start Battery positive terminal from your Start Battery. Connect the other
Battery Positive cable (Cable 1) into the existing Battery Terminal from your Start
Battery. Reconnect the existing Battery Terminal to your Start Battery positive terminal.
5 Insert the crimped ends of the Battery Positive cables into the isolator terminal
protectors provided as per diagrams E, F & G.
6 Mount the SBI unit in a convenient location, as shown in diagram K. Redarc
recommends connecting the SBI as close as possible to the start battery.
7 Connect the SBI ground wire to chassis earth as shown in diagram L. Ensure a good
connection is made and any paint has been removed from the mounting location.
8 Connect the Ground terminal of the Auxiliary battery to chassis earth, using the 750mm
Auxiliary Battery ground cable and the other battery terminal provided as per diagrams
H, I & J.
1
Strip wire
1 1
5
Insert wire
into battery
terminal
8
Strip wire
8 8
5
Insert wire
into battery
terminal
2
6
2
6
2
6