Brochure

A flat battery can occur at the most inconvenient
times, without warning and leaving you feeling
frustrated and irritated. This usually leaves you
with two options, call for technical assistance
which can be an expensive and time-consuming
process, or invest in a fast and practical
maintenance AC battery charger.
Whether you use your vehicle on a daily basis or
sporadically for special occasions, you’re putting
a strain on the battery. Most people only use their
vehicles for short distances and, when combined
with the use of various accessories such as phone
chargers, lights and air conditioning, all impact on
the power coming out of your battery.
A charger for all applications
Whether you have a motorbike, boat, jet ski, scooter,
tractor or any other application with an electric
starter motor, it is likely that it isn’t used every day.
The SmartCharge range will ensure that no matter
what your mode of transport is we can give the
battery the charge it needs. In fact, the SmartCharge
range also performs a battery check both before and
after charging and can warn you if anything is wrong
with the battery.
A simple solution
Simple to use and easy to set up, the SmartCharge
range is the ideal solution for your vehicle’s battery.
To operate, all you have to do is attach the clamps to
the battery terminal, insert the plug into the socket
and press the “on” button. The SmartCharge then
gets to work charging and restoring your battery.
The battery display gives a simple readout of the
charging status and indicates when your battery is
fully charged. Once charged, all you have to do is
wind up the cables and it’s good to go for the next
time you need it.
Want to know more?
Scan this QR code with
your smartphone to go
to the Redarc website
Specifications
SBC1204 SBC1206 SBC1208 SBC1210
Output current (max) 4A 6A 8A 10A
Battery size 12V/2-110Ah 12V/10-150Ah 12V/20-200Ah 12V/30-250Ah
Input 230V AC 50-60Hz
Power consumption 60W 115W 132W 175W
Inverse current < 1 mA
Output voltage 14.4/14.7V
Weight 735g 735g 750g 750g
Dimensions 210 x 90 x 54mm 235 x 90 x 54mm
IP class IP65
Warranty 5 Years
Easy as 1-2-3
Disconnect
Connect
www.redarc.com.au
Multi-stage charging process
Analyse
Battery condition test
1
Top Charge
Charging with constant voltage
level: 14.4V or 14.7V
4
Soft Start
Testing the battery and adjusting
to the correct current (amps)
2
Main Charge
Main charge until voltage level
of 14.4V or 14.7V is reached
3
Sleep
Fully charged battery: the battery
will enter sleep mode for 168
hours (1 week)
7
Analyse
Charging is stopped for 2 minutes,
for measuring the battery
5
Wake up
Start new charging loop from step 1
8
Float
Voltage level: 13.8V
6
SmartCharge charging steps
A
V
10A
6A
4A
8A
13.8
14.4/14.7
1 2
3 4 6 7 85
Visit redarc.com.au for more information.
The SmartCharge range is available from
your nearest auto electrician or 4WD
specialty store.
®
SBC12ACC1-4
12V Charging Kit
SBC12ACC1-5
12V Charging Cable
withRing Terminals
SBC12ACC1-6
12V Charging Cable
withClamps
SmartCharge accessories
A range of accessories are available to make recharging batteries even easier.
The 12V Charging Kit and 12V Charging Cables allow connection to the battery
allowing an easy and hassle-free charge.
Each cable includes an integrated battery indicator that enables you to check the
status of the battery via a red, yellow or greenlight.
Battery
size
8A
SBC1208
10A
SBC1210
Suitable for all 12 volt lead acid (GEL, AGM, MF, Ca/Ca, EFB), LiFePO
4
and start-stop batteries
Charging
time
More powerful charger
=
Shorter charging time
Choose the right SmartCharge for your needs
GoodNot suitable
Better
Best
4A
SBC1204
6A
SBC1206
Choose the right SmartCharge for your needs
Recharge
required
Recharge
suggested
Healthy
battery