User Manual

FEATURES
AC Sensing: The probe is supplied with AC, so it does not produce
electrolysis to cause cooling system corrosion.
Broken Wire Detection: If the wire to the probe is broken it will sound the
alarm.
Universal supply: Suitable for 12V or 24V, negative or positive earth
vehicles.
Self-test: On ignition turn on, it performs a self test by internally
duplicating low coolant or a broken probe wire. In self-test, the LED
ashes twice and the beeper sounds 4 times.
Anti-slosh delay: If the radiator is not quite full and coolant sloshes
around, the LED fl ashes after ½ second but the beeper will not sound
for 3-4 seconds. So there is a visual reminder to top up but no annoying
beeps.
External warning lamp: If the LCA1224 is to be mounted where it cannot
be seen by the driver, an external warning lamp output allows a dashboard
lamp to be used. The maximum rating for an external lamp is 0.5A max.
External warning buzzer: If the LCA1224 is to be mounted where it cannot
be heard by the driver, an external warning buzzer output allows a louder
(or more suitably located) buzzer to be used. The maximum rating for an
external buzzer is 0.5A max.
SPECIFICATIONS
Model LCA1224
DC input voltage range 11-32VDC
Current draw (alarm off) <2mA
Current draw (alarm on) Approx 15mA
Internal audible warning Piezo buzzer
Internal visual warning Red LED
Output to external relay Ground, 0.5A max
Dimensions 65x40x25mm
Weight 65g
Warranty 2 Years
Low Coolant Alarm
LCA1224
FUNCTION
The Redarc LCA1224 is used in
a 12V or 24V automotive system
to monitor radiator coolant level
and provide a visual and audible
alarm if the coolant falls below the
chosen level. It can give warning
of a sudden loss of coolant (Eg
from a burst radiator hose) and
allow the operator to stop the
vehicle and switch off the engine,
to prevent any damage due to
overheating.
Copyright © 2012 Redarc Electronics Pty. Ltd. All rights reserved.

Summary of content (4 pages)