Optional Temperature Sensor GS-UT-80 GS-UT-120 GS-OWT1-4 GS-OWT1-8 (GS-OWT1-4 Shown)
WARNING & SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the Redarc Gauge Temperature Sensor range. DO NOT OPERATE THE MONITOR UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE MONITOR AND SENSORS ARE INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS. 1. The Redarc Gauge Temperature Sensor range is designed to provide an accurate indication of temperature.
INSTALLATION Check your Sensor Part number and decide on what you intend to measure. 1. If you are measuring cabin temperature you may wish to plug the sensor directly into the 2 way White connector that is located on the gauge harness. 2. The kit comes with an extension harness of 3 metres (approx) for GS-OWT1-4 & GSOWT1-8 or 6 metres (approx) for GS-UT-80 & GS-UT-120. 3. If you find this cable is too short you may use any 2 core wire as an extension. 4.
TWO YEAR PRODUCT WARRANTY Over the last three decades our company has established a reputation as the power conversion specialist. A 100% Australian-owned company, we have met the needs of customers in transport and other industries through exciting, innovative thinking.
