Product Manual
OPERATING INSTRUCTIONS
Setup Modes
(Setup mode is indicated by display of the programming symbol )
ID Select
Mode / Beeps: 1
Selections: 0 to 9 & A to F (16 selections)
For a single gauge setup do not change this selection as only the default selection
“Id.0” allows programming of modes.
Background Colour
Mode / Beeps: 2
Selections: 13 colours
Press and hold to select the programming button to select the colour that the gauge
backlight will display during normal operation. There are 13 different backlight
colour options.
Alert Colour
Mode / Beeps: 3
Selections: 2 Colours (Amber & Red)
Press and hold the programming button to select the colour that the gauge backlight
will change to when an alert is indicated (such as during an over temperature
warning).
Low Oil Pressure Warning Level
Mode / Beeps: 4
Selections: 2PSI - 40PSI
Press and hold the programming button until the desired warning pressure is set.
Water Temperature Warning Level
Mode / Beeps: 5
Selections: 90°C - 140°C
Press and hold the programming button until the desired warning temperature is
set.
Water Temperature ‘Relay On’ Level
Mode / Beeps: 6
Selections: 30°C - 140°C
Press and hold the programming button until the desired warning temperature is
set.
5
30
60
90
120
C
0
TEMP
C
0
0
20
40
60
80
PSI
OIL
30
60
90
120
C
0
TEMP
C
0
0
20
40
60
80
PSI
OIL
30
60
90
120
C
0
TEMP
C
0
0
20
40
60
80
PSI
OIL
30
60
90
120
C
0
TEMP
C
0
0
20
40
60
80
PSI
OIL
30
60
90
120
C
0
TEMP
C
0
0
20
40
60
80
PSI
OIL
30
60
90
120
C
0
TEMP
C
0
0
20
40
60
80
PSI
OIL