Product Manual

WARNING & SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the G52-EB
Gauge.
DO NOT OPERATE THE GAUGE UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE GAUGE IS
INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS.
1. The G52-EB EGT Gauge is designed to provide an accurate indication of boost pressure & exhaust gas
temperature. As accurate as the indication might be, these gauges are not designed to be a substitute for
regular maintenance and inspection by a qualified technician.
2. REDARC recommend that the G52-EB EGT Gauge be installed by a qualified technician.
3. Ensure the gauge face is cleaned only using soapy water and a soft cloth.
4. REDARC gauges are not suitable for installation into marine environments.
SPECIFICATIONS
G52-EB
Input Voltage Range 6 - 16V (For 24V systems use GA-2412V)
Nominal Current Draw 30mA
Gauge Dimensions Ø52mm x 42mm (not incl. studs, Bezel Ø56mm)
Gauge Weight 50g
Warranty 2 Years
Sensor Boost EGT Interface
PRODUCT FUNCTION
The G52-EB is designed to measure exhaust gas temperature which is indicated on a 270°
sweep gauge indicating between 0°C - 1000°C.
The G52-EB also features a Pressure (Boost) meter which is displayed on the digital readout
at the bottom of the gauge and is capable of measuring between 0 and 35PSI.
1
SAL.FOR.Instruction Manual.G52-EB - Version 2
PSI
0
2
3
4
5
6
7
8
9
10
EGT
X100
BOOST
Exhaust Gas Temp. Gauge
270° Sweep
0°C - +1,000°C
Pressure Gauge
Digital
0 - 35 PSI
Ensure that ‘P’-Clip
and star washers are
used during installation.
52mm
4.5mm 20mm
42mm
55mm 44mm
36mm
G52-EB