Manual

OPERATING INSTRUCTIONS
Setup Modes (Setup mode is indicated by display of the programming symbol )
ID Select
Mode / Beeps: 1
Selections: 0 to 9 & A to F (16 selections)
For a single gauge setup do not change this selection as only the default selection
“Id.0” allows programming of modes.
Background Colour
Mode / Beeps: 2
Selections: 13 colours
Press and hold to select the programming button to select the colour that the gauge
backlight will display during normal operation. There are 13 different colour options.
Alert Colour
Mode / Beeps: 3
Selections: 2 Colours (Amber & Red)
Press and hold the programming button to select the colour that the gauge backlight
will change to when an alert is indicated (such as during an over temperature
warning).
Boost Warning Level
Mode / Beeps: 4
Selections: 10PSI - 30PSI
Press and hold the programming button until the desired warning pressure is set.
EGT Warning Level
Mode / Beeps: 5
Selections: 400°C - 700°C
Press and hold the programming button until the desired warning temperature is
set.
Optional Temp Meter Display Mode
Mode / Beeps: 6
Selections: 0.0°C or ‘nc’
If you have installed the optional temperature sensor and wish to display temperature
set this to 0.0°C, otherwise set to ‘nc’.
6
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST