Manual

WARNING & SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the G52-BET
Gauge.
DO NOT OPERATE THE GAUGE UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE GAUGE IS
INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS.
1. The G52-BET Boost & EGT Gauge is designed to provide an accurate indication of Boost Pressure and Exhaust
Gas Temperature (EGT) with an optional temperature indication. As accurate as the indication might be, these
gauges are not designed to be a substitute for regular maintenance and inspection by a qualified technician.
2. REDARC recommend that the G52-BET Boost & EGT Gauge be installed by a qualified technician.
3. Ensure the gauge face is cleaned only using soapy water and a soft cloth.
4. REDARC gauges are not suitable for installation into marine environments.
SPECIFICATIONS
G52-BET
Input Voltage Range 6 - 16V (For 24V systems use GA-2412V)
Nominal Current Draw 30mA
Gauge Dimensions Ø52mm x 42mm (not incl. studs, Bezel Ø56mm)
Gauge Weight 50g
Warranty 2 Years
Sensor Boost/EGT Interface Box
PRODUCT FUNCTION
The G52-BET is designed to measure boost pressure (between 0-35psi) and exhaust gas
temperature (between 300°C - 700°C) using the included Boost EGT Interface box.
The G52-BET also features an optional Temperature display for which a seperate sensor is
required*. The temperature is displayed on the digital readout at the bottom of the gauge and
is capable of measuring between -40°C & +160°C (depending on sensor chosen).
1
SAL.FOR.Instruction Manual.G52-BET - Version 2
Boost Pressure Gauge
120° Sweep
0 PSI - 35 PSI
EGT Gauge
120° Sweep
300°C - 700°C
Temp Gauge Digital
(optional)
-40°C - +160°C
0
10
20
30
3
5
7
4
6
C
0
EGT
X100
PSI
BOOST
*(Either GS-UT-80, GS-UT-120, GS-OWT1-4 or GS-OWT1-8)
Ensure that ‘P’-Clip
and star washers are
used during installation.
52mm
4.5mm 20mm
42mm
55mm
44mm
36mm
G52-BET