Product Manual

OPERATING INSTRUCTIONS
Setup Modes (Setup mode is indicated by display of the programming symbol )
ID Select
Mode / Beeps: 1
Selections: 0 to 9 & A to F (16 selections)
For a single gauge setup do not change this selection as only the default selection
“Id.0” allows programming of modes.
Background Colour
Mode / Beeps: 2
Selections: 13 colours
Press and hold to select the programming button to select the colour that the gauge
backlight will display during normal operation. There are 13 different backlight
colour options.
Alert Colour
Mode / Beeps: 3
Selections: 2 Colours (Amber & Red)
Press and hold the programming button to select the colour that the gauge backlight
will change to when an alert is indicated (such as during an over temperature
warning).
Boost Warning Level
Mode / Beeps: 4
Selections: 10PSI - 30PSI
Press and hold the programming button until the desired warning pressure is set.
EGT Warning Level
Mode / Beeps: 5
Selections: 400°C - 700°C
Press and hold the programming button until the desired warning temperature is
set.
Relay Output Mode
Mode / Beeps: 6
Selections: Pointer(s)
ENSURE THAT THE OPTIONAL RELAY IS CONNECTED WHILST CHANGING THIS SETTING IF IT IS
TO BE USED.
Press and hold the programming button to cycle through which warning(s) will trigger
the relay output. A pointer indicates the respective reading that will trigger the relay.
6
0
10
20
30
3
5
7
4
6
A
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
A
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
A
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
A
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
A
EGT
X100
PSI
BOOST
0
10
20
30
3
5
7
4
6
A
EGT
X100
PSI
BOOST