Manual

2 INSTALLATION
2.3 Mounting the remote head
The Tow-Pro
™
Classic remote head is designed to be mounted at a distance from
the main unit, allowing for a neat, convenient installation and not impeding on lower
leg airbags or driver leg room. The Tow-Pro
™
Classic remote head is designed to be
mounted on or around the vehicle dashboard but should not be mounted in vehicle
head impact zones. The Tow-Pro
™
Classic remote head can be mounted directly to
the dashboard, to the centre console or through a spare knock-out switch panel and
requires only two holes to be drilled as per the below diagram.
Ensure that the Tow-Pro
™
Classic Remote Head is not mounted in vehicle head-impact
zones. Doing so may result in injury to the driver and/or passenger in the result of an
accident.
7
Ø3.5mm
Ø10.0mm
(drill pilot
hole first
or use a
spade bit)
7.5mm
*2.0 - 3.0mm
1. Strip cable to 10mm
2. Insert cable
3. Test by pulling back on cable
Inserting Cables
2
1
1
2
Removing Cables
1. Press in orange button
2. Pull the cable outwards