Product Manual

7
INSTALLATION
STEP 5
1 × M6 Flanged Nylon Locking Nut
1 × Long Tag Bolt
Insert the Long tag bolt into the large rectangular
hole at the bottom of the support upright (5a).
TIP: The lower section of the tag tolt can be bent to
make it easier to insert.
Feed the threaded end of the tag bolt out through the
hole near the top of the support upright, then loosely
fit 1 × supplied M6 flanged nylon locking nut.
TIP: Once the threaded section of the tag bolt is
protruding from the correct hole, hold it in place
with a screw driver or similar (5b).
5b
5a