Product Manual

2
THE BCDC MOUNTING BRACKET
The REDARC BCDC Mounting Bracket is designed to install your BCDC in the cool airflow at the front of
your vehicle, away from high temperature areas for maximum performance. The BCDC Mounting Bracket
is constructed from durable stainless steel and has been designed to fit existing mounting points in your
vehicle for ease of installation.
This manual outlines installation of the BCDCMB-009 mounting bracket in the Mitsubishi Triton MR Diesel
or Mitsubishi Pajero QE/QF.
WARNING AND IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS — THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS FOR THE BCDCMB-009
MOUNTING BRACKET.
DO NOT INSTALL THE BCDC MOUNTING BRACKET UNLESS YOU HAVE READ AND UNDERSTOOD THESE INSTALLATION
INSTRUCTIONS.
VERIFY THE MOUNT WILL FIT YOUR VEHICLE MODEL WITH THE FITTED ACCESSORIES AND THAT THE PLASTIC TRIM
ON YOUR VEHICLE LOOKS THE SAME AS IN THE ILLUSTRATIONS INCLUDED IN THIS GUIDE.
CAUTION
• Removing factory fitted screws may expose bare metal resulting in rust. Retouch any exposed metal
with rust inhibitor.
• Damage to cabling can cause failure of BCDC and vehicle electrical systems. Ensure BCDC cables and
factory wiring are cable tied away from pulleys and fan belts, do not chafe on sharp edges and allow
slack for flexing.
Copyright © 2020 REDARC Electronics Pty Ltd. All rights reserved.
Design and specifications are subject to change without notice.