Brochure

The BCDC In-vehicle Dual Battery Charger range
The REDARC In-vehicle Dual Battery Charger range features a wide 9-32 volt input range, allowing an auxiliary
battery to be charged from either a 12 or 24 volt vehicle electrical system. All models incorporate dual battery
isolation as well as protection against voltage spikes, overheating and reverse polarity connection, to ensure
complete protection of all your batteries.
12 volt auxiliary battery chargers
There are two output current options to choose from - 6 and 20 amps - they charge AGM, gel, calcium content, VRLA and standard lead acid
batteries while driving. The IGN-model is suitable for vehicles with an ECU-controlled, variable voltage alternator.
BCDC1206 BCDC1220, BCDC1220-IGN
12 volt dual input auxiliary battery chargers
The next-generation 25, 40 and 50 amp models with fully integrated MPPT solar regulators are able to charge common lead acid auxiliary
batteries as well as lithium iron phosphate batteries (LiFeP04). They charge from solar and DC inputs simultaneously, with built in ‘GreenPower
Priority’ they will select solar first, meaning less load on the alternator. They also suit standard and variable voltage/smart alternators.
SOLAR
WITH MPPT
REGULATOR
SOLAR
WITH MPPT
REGULATOR
SOLAR
WITH MPPT
REGULATOR
BCDC1225D BCDC1240D BCDC1250D
24 volt auxiliary battery chargers
To meet the demands of 24 volt auxiliary battery charging, a range of 24 volt, 20 amp chargers are available. They feature a fully integrated
MPPT solar regulator. The BCDC2420 charges AGM, gel, calcium content, VRLA and standard lead acid batteries. The LFP2420 and
LFP2420-LV are designed to charge Lithium Iron Phosphate (LiFeP04) batteries. The LV model features a lower voltage setting so it can operate
with variable voltage alternators.
SOLAR
WITH MPPT
REGULATOR
SOLAR
WITH MPPT
REGULATOR
SOLAR
WITH MPPT
REGULATOR
SOLAR
WITH MPPT
REGULATOR
BCDC2420 BCDC2420-LV LFP2420 LFP2420-LV
BCDC mounting brackets
Our range of vehicle-specific mounting brackets aid engine-bay installations of our BCDC range. They allow installation in the front of the
vehicle, are constructed from 304 stainless steel and are designed to fit existing mounting points in the engine bay.
BCDCMB-001
Suitable for Toyota
Landcruiser 200
(11/2008 onwards)
BCDCMB-002
Suitable for Toyota
Landcruiser 70
(3/2007 onwards)
BCDCMB-003
Suitable for Toyota
Landcruiser Prado
150 (10/2009
onwards)
BCDCMB-004
Suitable for
ToyotaHilux
(3/2005-9/2015)
BCDCMB-005
Suitable for
ToyotaHilux
(10/2015 onwards)
BCDCMB-006
Suitable for Isuzu
D-MAX (6/2012
onwards) and
Holden Colorado RG
(10/2015 onwards)
BCDCMB-007
Universal Mounting
Kit
BCDCMB-008
Suitable for Toyota
Landcruiser 100,
J100 Series (1998-
2007), J105 Series
(1998-2007)