Manual

2
THE BCDC MOUNTING BRACKET
The REDARC BCDC Mounting Bracket is designed to install your BCDC in the cool airflow
at the front of your vehicle, away from high temperature areas for maximum performance.
The BCDC Mounting Bracket is constructed from durable stainless steel and has been
designed to fit existing mounting points in your vehicle for ease of installation.
This manual outlines installation of the BCDCMB-006 mounting bracket in the Isuzu
D-MAX and Holden Colorado RG.
WARNING & SAFETY INSTRUCTIONS
Save these instructions - this manual contains important safety instructions for
the BCDCMB-006 Mounting Bracket
Do not install the BCDC Mounting Bracket unless you have read and understood
these installation instructions.
Verify the mount will fit your vehicle model with the fitted accessories and that the
plastic trim on your vehicle looks the same as in the illustrations included in this
guide.
• Removing factory fitted screws may expose bare metal resulting in rust. Retouch any
exposed metal with rust inhibitor
• Damage to cabling can cause failure of BCDC and vehicle electrical systems. Ensure
BCDC cables and factory wiring are cable tied away from pullies and fan belts, do not
chafe on sharp edges and allow slack for flexing.
SAL.FOR.Instruction Manual.BCDCMB-006 - Version 1