Manual

2
THE BCDC MOUNTING BRACKET
The REDARC BCDC Mounting Bracket is designed to install your BCDC in the cool airflow
at the front of your vehicle, away from high temperature areas for maximum performance.
The BCDC Mounting Bracket is constructed from durable stainless steel and has been
designed to fit existing mounting points in your vehicle for ease of installation.
WARNING & SAFETY INSTRUCTIONS
Save these instructions - this manual contains important safety instructions for
the BCDCMB-005 Mounting Bracket
Do not install the BCDC Mounting Bracket unless you have read and understood
these installation instructions.
Before fitting, follow instructions and review your vehicle to ensure this kit suits
your vehicle make and model specifications.
• Removing factory fitted screws may expose bare metal resulting in rust. Retouch any
exposed metal with rust inhibitor if it is not an earth connection.
• Damage to cabling can cause failure of BCDC and vehicle electrical systems. Ensure
wiring is clear of sharp edges and moving parts, and have enough slack to allow for
flexing.
SAL.FOR.Instruction Manual.BCDCMB-005 - Version 1