Manual

6
Step 8
• Secure the third mounting position
with the supplied M6x20 Hex Bolt,
M6 Washer and M6 Flanged Nylon
Locking Nut. Tighten to 7.5 Nm.
Step 9
• If removed in Step 5, re-fit the modified plastic air deflector with the 2 body
clips. Finalise BCDC wiring according to the BCDC instruction manual.
PERIODIC MAINTENANCE/CHECKS
Check the BCDC is clear of combustibles during regular servicing of the vehicle. Build-
up of combustible materials around the bracket may result in a fire hazard.
INSTALLATION