Manual

4
Step 1.2
• Mount the BCDC charger to
the inside of the bracket using
4 M6x12 Pan Head Screws and
Nylon Locking Nuts.
2 TRIM REMOVAL
Step 2.1
• Remove the plastic radiator
support panel cover by popping
the 13 clips out and lifting the
panel clear of the vehicle. Retain
the clips for re-fitting.
PUSH
LIFT
Step 2.2
• Unbolt the two horns from the radiator support panel and leave uninstalled until
after the bracket and charger assembly is fitted.
1 ASSEMBLY