BCDC Mounting Bracket Suitable For Toyota LandCruiser Prado 150 150 Series (10/2009 - On) BCDCMB-003
THE BCDC MOUNTING BRACKET The REDARC BCDC Mounting Bracket is designed to install your BCDC in the cool airflow at the front of your vehicle, away from high temperature areas for maximum performance. The BCDC Mounting Bracket is constructed from durable stainless steel and has been designed to fit existing mounting points in your vehicle for ease of installation.
KIT CONTENTS A D E F E F G B C 1 ASSEMBLY Step 1.1 • • Assemble the BCDC mounting bracket and mounting foot using M6x12 Pan Head screws with Nylon locking nuts. Select the correct mounting foot and assembly position for your vehicle: S L Part B on the short (S) mounting suits vehicles built from 10/2009 until the 09/2013 facelift. • Part B on the long (L) mounting suits vehicles built from 09/2013 to 10/2017.
1 ASSEMBLY Step 1.2 • Mount the BCDC charger to the inside of the bracket using 4 M6x12 Pan Head Screws and Nylon Locking Nuts. 2 TRIM REMOVAL Step 2.1 • LIFT Remove the plastic radiator support panel cover by popping the 13 clips out and lifting the panel clear of the vehicle. Retain the clips for re-fitting. PUSH Step 2.2 • Unbolt the two horns from the radiator support panel and leave uninstalled until after the bracket and charger assembly is fitted.
3 INSTALLATION (10/2009 - 10/2017 VEHICLES) Step 3.1 • Remove the M6 hex bolt from the passenger side of the lower grille support tab (location indicated in Step 3.2). Removing factory fitted screws may expose bare metal resulting in rust. Retouch any exposed metal with rust inhibitor. Step 3.2 • Sit the charger assembly on the radiator support panel and align the lower mounting foot hole. Reinstall the factory M6 hex head bolt in the lower grille support tab to fasten the lower foot.
4 INSTALLATION (10/2017- PRESENT VEHICLES) Step 4.1 • Sit the charger assembly on the radiator support panel and align the lower mounting foot hole. Fasten the mounting foot using the provided M6x12 Pan Head bolt and Nylon locking nut. Damage to cabling can cause failure of BCDC and vehicle electrical systems. Ensure wiring is clear of sharp edges and moving parts, and have enough slack to allow for flexing. Step 4.
5 INSTALLATION (ALL VEHICLES) Step 5.1 • Re-fit the vehicle horns to the radiator support panel. Both horns will now mount together, back to back on the driver’s side factory mounting position. Note: The front facing horn can be bent slightly forward to prevent vibration when being used. A quick sound check will confirm placement is correct. Step 5.3 • Fit the suitable REDARC Fuse Kit (FK40 or FK60) as close as possible to battery according to the REDARC BCDC Instruction Manual.
5 INSTALLATION (ALL VEHICLES) Step 5.7 • Re-fit the plastic cover to the radiator support panel with the clips removed during trim removal. These clips are secured when the centers are flush with the outer edge of the clip. UNCLIP RESET INSTALL SECURE Depressed Raised Raised Flush 6 PERIODIC MAINTENANCE/CHECKS Check the BCDC is clear of combustibles during regular servicing of the vehicle. Buildup of combustible materials around the bracket may result in a fire hazard.
7 NOTES 9
7 NOTES 10
TWO YEAR PRODUCT WARRANTY Over the last three decades our company has established a reputation as the power conversion specialist. A 100% Australian-owned company, we have met the needs of customers in transport and other industries through exciting, innovative thinking.
Free technical assistance! For product and technical support contact your regional distributor, call our head office between 8:00am to 5:30pm Australian Central Standard Time, Monday to Friday or send an email using the regional specific details outlined below. Australia (and other Global regions) power@redarc.com.au www.redarc.com.au +61 8 8322 4848 New Zealand power@redarcelectronics.co.nz www.redarcelectronics.co.nz +64-9-222-1024 North America power@redarcelectronics.com www.redarcelectronics.
