Manual

5
Step 4
• Remove the 2 x M8 hex bolts from
the passenger side of the radiator
support panel. Loosen the inner
M6 Hex bolt from the headlight
mounting tab.
Removing factory fitted screws may
expose bare metal resulting in rust.
Retouch any exposed metal with
rust inhibitor if it is not an earth
connection.
Step 5
• Align the BCDC Mounting Bracket
with the bolt holes on the radiator
support and slide the lower
mounting into the loosened M6
bolt.
Step 6
• Re-install and tighten the M8 hex
bolts in the radiator support panel.
Visually align the charger to a neat
appearance and tighten the lower
M6 hex bolt.
INSTALLATION