Manual

4
INSTALLATION
Step 1
• Remove grille from the vehicle by removing the 3 hex head screws from the top
mounting tabs. Press the tabs on the 2 lower inside mount points outwards to
release plastic clips. Lift the grille out. Remove the 2 lower plastic clips from
the vehicle and refit to the grille.
Step 2
• Fit the BCDC unit to the mounting
bracket using the M6x12 Pan Head
Bolts and M6 Nylon Locking Nuts.
Note: Orient the fasteners with the
head of the bolts facing toward the
inner of the bracket.
Step 3
• Fit the suitable REDARC Fuse Kit
(FK40 or FK60) to the mounting
points using M5x12 Pan Head Bolts
and M5 Nylon Locking Nuts.
BCDC1220 - Use FK40
BCDC1225D - Use FK40
BCDC1240D, 1250D - Use FK60