Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

955-0116_V6.1, REV-E | 96

CONNECT WIRELESSLY TO A DEVICE VIA AD-HOC MODE

In Ad-Hoc mode, the camera and your device connect to each other. To connect the camera to your device via

an ad-hoc network, follow the instructions below:

1. Go to Menu > Settings > Setup > Communication.

2. Select the WiFi tab.

3. Select Ad-Hoc from the Mode drop-down menu.

4. Select a wireless channel from the Channel drop-down menu. The default is Ch1, and you can select one

out of 11 channels.

5. Select a security option from the Encryption drop-down menu:

‒ NONE: The connection will be unsecured.

‒ WPA2: The connection will be encrypted via WPA2.

6. If you selected WPA2 as the encryption option, type the passphrase that will be required to access the

network.

7. Close the WiFi screen.

8. Connect your device to the ad-hoc network created by the camera. The steps in this procedure depend on

what type of device and operating system you are using. For example, if you are connecting an iOS device,

go to Settings > Wi-Fi > Devices, and select the camera name. The camera name displays on the WiFi screen

in-camera.

NOTE: If you created a passphrase for the network, you will need to enter that passphrase.

The camera and your device are now connected.