Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

955-0116_V6.1, REV-E | 78

TIMECODE

NOTE: Using timecode requires ports that are only available on select WEAPON expanders. For more information,

go to “Input/Output Connectors” on page 161.

For more information about timecode, go to “Timecode, Genlock, Multi-Camera Setup” on page 132.

TIMECODE SOURCE MODE DESCRIPTION

User Provided (Internal) Use Real Time Clock

(RTC)

Uses the internal Real Time Clock as the timecode counter

source. You can set the hours, minutes, and seconds in the

numerical boxes on the screen.

Set Manually Define a custom value as the timecode counter seed. Set

the hours, minutes, and seconds in the numerical boxes on

the screen.

External Varies by device Uses the timecode from an external device connected to

the timecode connector on the expander

LTC OUT

SLATE

Use the Slate menu to add metadata to clips. After configuring the following fields, the information populates

in the Media menu when formatting media:

 Cam ID

 Cam Pos

NOTE: The scene name is limited to eight (8) characters.