Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

955-0116_V6.1, REV-E | 72

LOOK CONFIG (LOOK CONFIGURATION)

Use the Look Config menu to set up Look A and Look B. In the Look Config menu, you can rotate the image

or apply a 3D LUT.

To apply Looks to monitors, go to “Monitor Config (Monitor Configuration)” on page 73.

FLIP/MIRROR

Mirror and flip (invert) the graphical user interface (GUI) and footage, effectively rotating the entire displayed

image 180°. Use this setting when mounting a monitor or the entire camera rig upside down. This setting only

affects the monitor, and does not affect captured footage.

LUT

Assign a 3D LUT to Look B. LUTs are loaded to the camera in the LUTs menu. For more information, go to

“LUTs” on page 71.