Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

BRIGHTNESS

Control the brightness of each LCD and EVF. Move to the right for a brighter display; move to the left for a

dimmer display.

ADVANCED

Provides access to additional monitor settings.

GESTURES

 Pinch to Magnify: Move two (2) fingers apart or together to toggle 1:1 Magnify. For more information, go to

“Magnify” on page 60.

 Double-Tap Right 25% to Record: Double-tap the right 25% of the video area on the LCD to toggle record.

 Double-Tap Left 25% to Start AF: Double-tap the left 25% of the video area on the LCD to start autofocus

when compatible lenses are used.

For a list of compatible lenses, go to “Lens Mounts and Lenses” on page 171.

OTHER

 Lock Touch Screen: Touchscreen control is locked. To unlock, tap the screen and follow the on-screen

instructions.

 Use Small Dialogs on 9" LCD: The dialogs on the RED Touch 9.0" LCD are smaller than the default dialogs.

GENLOCK OFFSET

NOTE: HD-SDI ports are only available on select WEAPON expanders. For more information, go to “Input/Output

Connectors” on page 161.

Offset the video of the selected output (HDSDI or REDCAST Module) to align it with the genlock signal:

 Negative offset: Advances the video, so the video reaches the switcher earlier than it would otherwise.

 Positive offset: Advances the video, so the video reaches the switcher later than it would otherwise.

NOTE: The REDCAST Module is not compatible with WEAPON cameras.

LCD/EVF 2 / HDMI SELECT

NOTE: HDMI ports are only available on select WEAPON expanders. For more information, go to “Input/Output

Connectors” on page 161.

Select to enable either the secondary LCD/EVF port (on the side of the WEAPON BRAIN) or the HDMI port on

an expander. The secondary LCD/EVF port and the HDMI port cannot be used at the same time.